The Keyence FS-V12 is a fiber amplifier designed as a cable-type expansion unit with NPN output, suitable for integration into fiber optic sensor systems. Operating with a red LED light source, it offers response times of 250 µs in FINE mode, 500 µs in TURBO mode, and 1 ms in SUPER TURBO mode.
The device supports both LIGHT-ON and DARK-ON operation modes, selectable via a switch. It features a red LED display indicator, a seven-segment four-digit red LED digital monitor, and a bar LED monitor with one orange and six green LEDs.
Timer functions include ON-delay (40 ms), OFF-delay (10 ms), and Timer OFF, all switch-selectable. The control output is an NPN open-collector with a maximum of 100 mA (24 VDC max.) and a residual voltage of 1 V max. Protection circuits include reversed polarity protection, over-current protection, and surge absorption.
Up to 16 expansion units can be connected, totaling 17 units. Mutual interference suppression allows for 4 units in FINE mode and 8 units in TURBO/SUPER modes. The device operates with a power voltage of 12 to 24 VDC ±10%, with ripple (P-P) 10% or less, and consumes 50 mA or less.
Environmental resistance includes ambient light tolerance up to 10,000 lux for incandescent lamps and 20,000 lux for sunlight, with an operating temperature range of -10 to +55 °C (no freezing) and a relative humidity range of 35 to 85% RH (no condensation).
Vibration resistance is 10 to 55 Hz with a double amplitude of 1.5 mm, 2 hours in each of the X, Y, and Z directions, and shock resistance is 500 m/s², 3 times in each of the X, Y, and Z directions. The case material is polycarbonate, and the weight is approximately 45 g.