Atlas Copco's TC52S (part number 4240044181) is a peak torque and angle monitoring controller designed for precise fastening applications. It enables multi-step tightening strategies and angle-verified fastening for critical joints.
The controller operates within a torque range of 0.2 to 52 Nm and offers torque accuracy of ±3% of reading. Angle accuracy is ±1°, with an angle range from 0 to 999°. It features a control mode combining peak torque and angle monitoring.
The power supply requirement is 24 V DC, and it supports communication via I/O (3 inputs, 2 outputs) and optionally RS-232. The operating temperature range is 0°C to +45°C, and it has a protection rating of IP54.
Functional features include peak torque and final angle verification, multi-step programming (up to 3 steps), torque-angle curve recording for the last 10 cycles, pass/fail indicators with torque and angle windows, data output via RS-232 (9600 baud), and a yellow LED for angle-only pass indications.
The structural design includes a housing made of PA66-GF30 (glass-fiber reinforced polyamide), measuring 120 x 80 x 45 mm, equipped with a 4-digit LED display, 3 status LEDs, 4 front-panel membrane buttons, and an M12 8-pin screwdriver connector.
This controller is suitable for applications in automotive chassis assembly, engine assembly, power tool manufacturing, and pump and valve assembly. Installation requirements include panel or wall mounting (bracket included), a 24 V DC power supply with a minimum of 2 A, an M12 8-pin cable to the screwdriver (maximum length 3 m), and an RS-232 cable (maximum length 15 m for reliable communication).
Usage precautions involve ensuring angle accuracy by using Atlas Copco certified screwdrivers, cleaning M12 connector pins before each shift, avoiding use in environments exceeding 45°C ambient temperature, and verifying the angle zero-point after any screwdriver change.